Sony Psp Update 6.60 Download



Apr 29, 2018 Now on your PSP go to Game Memory stick then launch the 6.60 update, follow the instructions to install the update: 2. Installing the custom firmware: Now Download the PSP 6.60 PRO-C2 custom firmware if you are on 6.00 If you are on 6.61 Download the PSP 6.61 PRO-C2 custom firmware.

  1. Psp System Update Download
  2. Sony Psp Update 6.60 Download Windows 7

After it finish installing the files, it will restarting your PSP in 5 second. 3.Check your PSP system software, it should change into PRO-B9. So that is how you install the PRO permanent Update on your PSP with version 6.60 - For PSP 3000 & GO: 1.Run the PROUPDATE 2.Run the FAST RECOVERY. Only this two files that you need to run. Updating your PSP to 6.60: To begin Download the Official PSP 6.60 firmware and update your PSP. To update the PSP simply extract the PSP folder from the 6.60 update RAR file and move it to your PSP's memory stick. As you can see below the PSP GAME UPDATE folder contains the EBOOT.PBP update. Added support for 11g units to 6.60 VERSION 6- Added support for 6.61 VERSION 5- Added support for 09g units to 6.20 What does it do? Allows users who are incontent with their firmware to downgrade to 6.20 using the Sony Updater. How do I use it? Copy the 'PSP' folder to your PSP. The downgrader is 'signed' and can be launched from.

Chronoswitch Downgrader
https://lolhax.org
[VERSION 7.0]
-> Added support for Infinity
[VERSION 6.1]
-> Added support for 11g units to 6.60
[VERSION 6]
-> Added support for 6.61
[VERSION 5]
-> Added support for 09g units to 6.20
[What does it do?]

Allows users who are incontent with their firmware to downgrade to 6.20 using the Sony Updater.
[How do I use it?]
Copy the 'PSP' folder to your PSP. The downgrader is 'signed' and can be launched from OFW XMB. You need to copy the 6.20 update to PSP/GAME/UPDATE/EBOOT.PBP and for PSPgo it must be the eflash it is placed on. After setup run the downgrader and follow the onscreen instructions.
[What does it technically do?]
6.20-6.35: It uses the utility/power exploit to gain kernel access and reboots into the updater with a special PRX running. This PRX uses the pspdecrypt functionality to decrypt the updater PRX when needed. This allows the updater to boot in the newer firmwares.
6.38/6.39: It uses my http_storage exploit to gain kernel access. Basically, http_storage has a vulnerability in it, where I can write -1 to anywhere in memory.
6.60: Uses sceNetMPulldown to gain kernel access.
6.61: same as 6.60 (only certloader kexploit is patched in 6.61)
[I'm a dev, sup?]
Source code included in package.
[Credits]
Davee - legend. Originally made 6.35/6.31 downgrader
some1 - legend. 6.38/6.39/6.60 support.
bbtgp - legend. Continued updates to psardumper (pspdecrypt) and the signing application 'prxEncrypter'.
coyotebean - legend. Coninuted updates to psardumper (pspdecrypt) and large influence and research regarding cryptographics.
kgsws - legend. First application signed and method released.
Silverspring - legend. Lots and lots of info on KIRK where we'd still be in the dark without.
Bubbletune - BTCNF injection code and bits and bobs here ;D
qwikrazor87 - 6.61/11g support.
[READ]
You run the application at your OWN risk. I am not help accountable if you PSP fucks up.
[Open Source]
Chronoswitch is open source! Get the source here: https://bitbucket.org/DaveeFTW/
[Twitter]
Follow me on twitter: @DaveeFTW

A new PSP system software update, v6.60, has been released. More details, and a download link, after the jump.

With this update, users who need to change their PlayStation Network password will be guided through the process. Also, system software stability during use of some features will be improved.

We downloaded the update file and made it available for you.

Update using a PC

Required items

  • A PSP® (PlayStation®Portable) system with battery pack and AC adaptor
  • Memory Stick Duo™ media with at least 28 MB of free space
  • Either system storage or Memory Stick Micro™ (M2)™ media, with at least 28 MB of free space
  • Internet access
  • One of the following:
    • A commercially available USB A<-> Mini-B (5-pin) cable
      or
      A USB cable with multi-use connector (included with the PSP®go system)
    • A commercially available Memory Stick USB reader/writer*
    • A PC equipped with a Memory Stick slot*
      *Depending on the slot type on the device you use, an adaptor (sold separately) is required.
      – For Memory Stick Duo™ media: Memory Stick Duo Adaptor (model number MSAC-M2; a Sony product sold separately)
      – For Memory Stick Micro™ (M2)™ media: Memory Stick Micro™ (M2)™ Adaptor (model number MSAC-MMDS or MSAC-MSDSP; both Sony products sold separately)

Download procedure

  1. Prepare to save the update data on Memory Stick Duo™ media, using one of the following methods:
    • Connect the PSP® system to the PC using the USB cable
    • Connect a commercially available Memory Stick USB reader/writer to the PC
    • Use the Memory Stick slot on the PC
  2. Create a folder for the update data on Memory Stick Duo™ media.Using your PC, create a folder named “PSP”. Within the “PSP” folder, create a folder named “GAME”. Within the “GAME” folder, create a folder named “UPDATE”. (Folder names must be in all uppercase letters).
  3. Download the update data for the PSP-1000/2000/3000 series and save it in the “UPDATE” folder created in step 2.

Notice
You must save the downloaded data as noted in these instructions. If you do not save in the correct location and with the filename shown below, the system will not recognize the update data.

  • Location: Save in the “UPDATE” folder
  • Filename: Save as filename “EBOOT.PBP”

Download procedure

Psp System Update Download

Psp system update
  1. Prepare to save the update data on either system storage or Memory Stick Micro™ (M2)™ media, using one of the following methods:
    • Connect the PSP® system to the PC using the USB cable
    • Connect a commercially available Memory Stick USB reader/writer to the PC
    • Use the Memory Stick slot on a PC
  2. Create a folder for the update data on either system storage or Memory Stick™ media.Using your PC, create a folder named “PSP”. Within the “PSP” folder, create a folder named “GAME”. Within the “GAME” folder, create a folder named “UPDATE”. (Folder names must be in all uppercase letters).
  3. Download the update data for the PSP-N1000 (PSP®go) series and save it in the “UPDATE” folder created in step 2.

Notice
You must save the downloaded data as noted in these instructions. If you do not save in the correct location and with the filename shown below, the system will not recognize the update data.

  • Location: Save in the “UPDATE” folder
  • Filename: Save as filename “EBOOT.PBP”

Update procedure

    • Fully charge the battery.
    • Connect the AC adaptor to the PSP® system and plug it into an electrical outlet.
    • Do not remove the AC adaptor.
    • Do not turn off the system or remove the Memory Stick™ media.

Notices

Update

Before starting the update, you must do the following:

During the update:

If an update is cancelled before completion, the system software may become damaged, and the system may require servicing to repair or exchange

Sony Psp Update 6.60 Download Windows 7

  1. If you saved the update data on Memory Stick™ media, insert the Memory Stick™ media containing the update data in the PSP® system.
  2. Start the update data.
    Select either (Memory Stick) or (System Storage) under (Game) from the home menu, and then select . Press the button to start the update.
  3. Confirm that the update was successful.After the update has been completed, select [System Settings] under (Settings) from the home menu, and then select [System Information]. If the [System Software] field displays the version number of the update, the update was successful.

    Hint

    After the update has been successfully completed, you can delete the update data from the Memory Stick™ media or from system storage.